360° Round
Neon Flex
Cylindrical silicone neon flex that emits light in all directions — full 360° visibility from every angle. Ideal for freestanding letters, sculptural shapes, tube-style edge lighting, and any installation where the light source must be seen from multiple viewpoints. IP67, DC 24V, CRI >90.
Why Choose 360° Neon Flex?
The round cylindrical profile emits light from every direction. Flat-profile neon flex only lights one side.
360° — This Series
Cylindrical body emits light in all directions. Visible from any angle — front, sides, and rear simultaneously. For freestanding shapes, open sculptures, tube borders, and installations with no fixed viewing direction.
Top Bend
Flat profile, bends horizontally. Light faces upward. For ceiling coves, pool surrounds, and façade outlines viewed from one direction. IP68, IK10, 50,000 hrs.
Side Bend
Flat profile, bends sideways. Light faces forward. For channel letters and logo outlines where viewers stand in front. 5 profile sizes, IP67.
3D (Top + Side)
Flat profile that bends both horizontally and sideways. Follows complex multi-plane paths. Still has one primary light direction — not omnidirectional like 360°.
Choose Your Profile
Both profiles share DC 24V, IP67, silicone body, and 30,000 hour LED lifespan. Select based on scale and required color types.
Compact profile, highest efficacy. Single Color (white CCTs + solid colors). For fine-detail shapes and tighter installation spaces.
Standard profile. Longer max run, full color type range including CCT Tunable, RGB Dimmable, and RGBIC (addressable).
Full Specifications
All models: DC 24V · IP67 · Silicone · CRI >90 (white) · Working temp -20°C to +55°C · 30,000 hrs. Lumen values approximate (±10%).
| Item No. | Profile | Type | CCT / Color | W/m | lm/W | ~lm/m | CRI | Cut (mm) | Max Run |
|---|---|---|---|---|---|---|---|---|---|
| Profile 085 — Compact Round (Ø 8.5 mm) | |||||||||
| RH-NF-360-085-SC | 085 | Single Color | 2000–6500K / Red / Blue / Green / Yellow / Pink / Purple | 10 | 70 | ~700 | >90 (white) | 50 | 5 M |
| Profile 250 — Standard Round (Ø 25 mm) | |||||||||
| RH-NF-360-250-SC | 250 | Single Color | 2000–6500K / Red / Blue / Green / Yellow / Pink / Purple | 10 | 50 | ~500 | >90 (white) | 50 | 10 M |
| RH-NF-360-250-CCT | 250 | CCT Tunable | 2700–6500K (Tunable) | 14 | 35 | ~490 | >90 | 62.5 | 10 M |
| RH-NF-360-250-RGB | 250 | RGB | RGB (Dimmable) | 14 | 10 | — | — | 62.5 | 10 M |
| RH-NF-360-250-RGBIC | 250 | RGBIC | RGB (Addressable) | 14 | 10 | — | — | 62.5 | 10 M |
Common Specifications
Electrical & Optical
| Voltage | DC 24V |
| CRI (white) | >90 |
| SC Cut Unit | 50 mm |
| CCT/RGB Cut Unit | 62.5 mm |
Physical & Environmental
| Body Material | Silicone |
| IP Rating | IP67 |
| Working Temp | -20°C to +55°C |
| Lifespan | 30,000 hrs |
Installation Notes
⚠️ Before Installing
- •Use DC 24V constant voltage power supply only. Leave at least 20% power headroom above calculated load.
- •SC models: cut every 50 mm at marked cut points only. CCT, RGB, and RGBIC models: cut every 62.5 mm.
- •Do not exceed the maximum single-end run length. For longer runs, use parallel injection or mid-point power feed.
- •IP67 covers the silicone body only. Ensure all connectors and end caps are correctly sealed for outdoor or wet-area use.
- •CCT models require a 24V 2-channel tunable white controller. RGB models need a 24V 3-channel RGB controller. RGBIC requires a pixel-addressable controller — standard RGB controllers are not compatible.
- •Avoid solvents, acid-based adhesives, or oxidising chemicals that may degrade the silicone body.
- •In freshly decorated spaces, allow full ventilation before installation. Methanol or benzene vapour can cause silicone yellowing.
Need Help Choosing the Right 360° Neon Flex?
Share your profile preference, color type, total run length, and application — we'll confirm the right model with specs and pricing.
Request a Quote